VBrick Systems MPEG-1, MPEG-2, MPEG-4 - page 34

28 EtherneTV Media Distribution System

TTo install STB software and/or the download application:

1. Double-click on Setup_STB_x_x_x.exe in the installer folder to launch the installer.

Then click Next to continue.

2. Select the features you want to install: the Download Application, the Release Package,

or both. Then click Next. (If you select only the Download Application, you will not be

prompted to create an FTP user account as explained below.)

3. Select an installation folder for the Download Application and click Next. The default is

C:\Program Files\VBrick\.

4. In this scenario, the installer has detected an FTP server and will create a user account.

STBUser is the default name and password for the FTP account. (If you change the

default user or password, you will have to enter them manually each time you run a

download.) Press Next, confirm, and press Next again (or Skip this step entirely if you do

not want to create an FTP account at this time). Note that if an FTP server is not

currently installed on the server machine, you may be prompted for the installation disk.

Contents

Main Copyright FCC Notice About VBrick Systems Contents Preface 1. Installation 2. Configuration 3. Local Configuration Page Preface Organization Font Co nventio ns Related Documen ts Chapter 1 Installation Using the Command Prompt Using pman Initial Setup Connecting to the Network Setting the IP Address Finding the DHCP IP Address Assigning a Static IP Address PAL Configuration Model Numbers Chapter 2 Configuration Login Saving Changes Configuration Video Settings Start Mode MCS Location Receive Address Page Local UI Location Home Page Location/Home Page Enable Main Volume/Line 1 Volume RTSP Streaming Data Buffering Seconds RTP Data Port Buffer Check for Underflow Lowest Bitrate for Buffer Check Network Settings Network Ethernet Management Display Settings General Resolution General Settings Serial Port Security System System Update Language Hardware Page Chapter 3 Local Configuration Accessing the XML Configuration File Uploading from the STB Downloading to the STB Local Configuration STB Admin Guide 23 XML Configuration Examples The following examples show how to modify the xml configuration file ( Example of live MPEG-4 multicast entry with SDP addressing information. Title and Global Message Settings. Example of live MPEG-1 multi cast entry with IP address, port number, and channel number. Example of live MPEG-4 multicast entry with local SDP addressing information. Example of MPEG-4 RTSP stream with Auto selection streaming. Example of live MPEG-4 stream with forced UDP streaming. Example of MPEG-4 RTSP stream with forced RTSP interleaved (TCP) streaming. Local Configuration Example of MPEG-1 unicast entry with port address. Example of MPEG-2 unicast entry with port address. Example of MPEG-4 content from NXG server with IP address and program name. Example of MPEG-1 content from NXG server with IP address and program name. Example of RTSP MPEG-2 content from NXG server with IP address and program name. Example of MPEG-1 content from VoD-W server with IP address and program name. Example of MPEG-2 content from VoD-W server with IP address and program name. Example of MPEG-4 content from VoD-W server with IP address and program name. Chapter 4 System Upgrade Upgrading from v3.71 or Higher Installing the Download Application Page Before You Begin Running ETV-STB Download Page Editing a Configuration File Logging Upgrade Activities Upgrading from v3.70 or Lower Creating an FTP Server with IIS Using a Web Browser to Run the Update Removing Lock Files Verifying the File Transfer Additional Upgrade Steps for Local Mode Page Chapter 5 Serial Port Passthrough How Passthrough Works Serial Port Pinouts Using Telnet Page Page Chapter 6 Using the Set Top Box Start Mode Local Mode Local-Fullscreen Mode MCS Mode Using the IR Remote Using the Wireless Keyboard Accessing the Web Page Page Index