| Configuration |
|
|
Table 1. Receive Address Syntax |
|
|
|
Multicast | RTSP@MULTICAST_MPEG1://group:port/ |
|
|
Multicast | RTSP@MULTICAST_MPEG2_TRANSPORT://group:port/ |
|
|
Unicast or Multicast | http://<ipaddr>/<path_to_remote_file> |
Remote SDP File |
|
|
|
Unicast or Multicast | RTSP@ISMA_SDP_FILE:///wfs/<path_to_local_file>, |
Local SDP File | e.g. RTSP@ISMA_SDP_FILE:///wfs/mpg/currentmp4.sdp |
| See |
| information on how to FTP the SDP file to the set top |
| box. |
|
|
Unicast | RTSP@UNICAST_MPEG1://#dataPort=<port> |
|
|
Unicast | RTSP@UNICAST_MPEG2_TRANSPORT://#dataPort=<port> |
|
|
RTSP | RTSP@KASENNA_MPEG1://<ipaddr>/program |
(EtherneTV NXG only) |
|
|
|
RTSP | RTSP@KASENNA_MPEG2_TRANSPORT://<ipaddr>/program |
(EtherneTV NXG only) |
|
|
|
RTSP | RTSP@INFOVALUE_MPEG1://<ipaddr>/program |
(EtherneTV |
|
|
|
RTSP | RTSP@INFOVALUE_MPEG2_TRANSPORT://<ipaddr>/ |
(EtherneTV | program |
| |
|
|
RTSP | RTSP@ISMA://<ip addr>/program |
Media Alliance (ISMA) | (e.g. RTSP@ISMA://172.22.117.2/vbrickvideo1 |
(Live or VoD)( | |
| |
| enterprogramname) |
| Video can be streamed over UDP or TCP. See RTSP |
| Streaming on page 13 for options. |
|
|
Local-Fullscreen Mode with MPEG-4 Multicast
Note If necessary you can FTP the SDP file to the set top box as described here. However the recommended method is to retrieve the SDP file via HTTP.
To decode multicast
TTo decode multicast
1.First, obtain an SDP file for the
2.Use an FTP client to place the SDP file on the set top box. A sample FTP session to use an set top box with the IP address of 172.22.117.70 is shown below. (Server prompts are shown in bold.)
STB Admin Guide | 11 |