VBrick Systems MPEG-1, MPEG-2, MPEG-4 Using the IR Remote

44 EtherneTV Media Distribution System

Figure 3. MCS Mode

Using the IR Remote

The remote control unit is an infrared remote control device you point at the sensor on the

front of the STB above the LEDs. As described below, the buttons on the remote control only

work if the STB is configured for MCS or Local mode. If configured for Local-Fullscreen,

you can only use the Volume and Mute buttons. See Start Mode on page 10 for more

information. The buttons on the handheld IR remote control are described in the following

table from left to right and top to bottom.

Note If playing a file on an NXG VOD server in Local mode, the Play button on the IR

remote will start (or re-start) the video from the beginning. For best results, use the

Channel and Select buttons rather than the mouse controls.

Contents

Main Copyright FCC Notice About VBrick Systems Contents Preface 1. Installation 2. Configuration 3. Local Configuration Page Preface Organization Font Co nventio ns Related Documen ts Chapter 1 Installation Using the Command Prompt Using pman Initial Setup Connecting to the Network Setting the IP Address Finding the DHCP IP Address Assigning a Static IP Address PAL Configuration Model Numbers Chapter 2 Configuration Login Saving Changes Configuration Video Settings Start Mode MCS Location Receive Address Page Local UI Location Home Page Location/Home Page Enable Main Volume/Line 1 Volume RTSP Streaming Data Buffering Seconds RTP Data Port Buffer Check for Underflow Lowest Bitrate for Buffer Check Network Settings Network Ethernet Management Display Settings General Resolution General Settings Serial Port Security System System Update Language Hardware Page Chapter 3 Local Configuration Accessing the XML Configuration File Uploading from the STB Downloading to the STB Local Configuration STB Admin Guide 23 XML Configuration Examples The following examples show how to modify the xml configuration file ( Example of live MPEG-4 multicast entry with SDP addressing information. Title and Global Message Settings. Example of live MPEG-1 multi cast entry with IP address, port number, and channel number. Example of live MPEG-4 multicast entry with local SDP addressing information. Example of MPEG-4 RTSP stream with Auto selection streaming. Example of live MPEG-4 stream with forced UDP streaming. Example of MPEG-4 RTSP stream with forced RTSP interleaved (TCP) streaming. Local Configuration Example of MPEG-1 unicast entry with port address. Example of MPEG-2 unicast entry with port address. Example of MPEG-4 content from NXG server with IP address and program name. Example of MPEG-1 content from NXG server with IP address and program name. Example of RTSP MPEG-2 content from NXG server with IP address and program name. Example of MPEG-1 content from VoD-W server with IP address and program name. Example of MPEG-2 content from VoD-W server with IP address and program name. Example of MPEG-4 content from VoD-W server with IP address and program name. Chapter 4 System Upgrade Upgrading from v3.71 or Higher Installing the Download Application Page Before You Begin Running ETV-STB Download Page Editing a Configuration File Logging Upgrade Activities Upgrading from v3.70 or Lower Creating an FTP Server with IIS Using a Web Browser to Run the Update Removing Lock Files Verifying the File Transfer Additional Upgrade Steps for Local Mode Page Chapter 5 Serial Port Passthrough How Passthrough Works Serial Port Pinouts Using Telnet Page Page Chapter 6 Using the Set Top Box Start Mode Local Mode Local-Fullscreen Mode MCS Mode Using the IR Remote Using the Wireless Keyboard Accessing the Web Page Page Index