Villaware BLVLLAZ05H instruction manual for u.k. and ireland only

for u.k. and ireland only

If the plug is not suitable for the socket outlets in your home, it can be removed and replaced by a plug of the correct type. Please refer to “Installation of a plug” below.

Installation of a plug applicable to U.K. and Ireland.

WARNING - THIS APPLIANCE MUST BE EARTHED

NOTE: If the terminals in the plug are not marked or if you are unsure or in doubt about the installation of the plug, please contact a qualified electrician. If a 13A 3-pin plug is fitted, it must be an ASTA approved plug, conforming to BS1363 standard.

Replacement 5A fuses must be BS1 or ASTA BS1362 approved.

5 amp

The wires in the mains lead are coloured as such:

GREEN AND YELLOW - EARTH

BROWN - LIVE

BLUE - NEUTRAL

Please note that the colour of these mains wires may not correspond with the colour markings that identify the terminals in your plug.

Please proceed as follows:

The wire which is coloured GREEN AND YELLOW must be connected to the terminal which is marked with the letter “E” or by the earth symbol “ ” or coloured GREEN AND YELLOW.

The BROWN coloured wire must be connected to the terminal, which is marked with the letter “L” or is coloured RED.

The BLUE coloured wire must be connected to the terminal, which is marked with the letter “N” or is coloured BLACK.

3