VIVOTEK
80 - User's Manual
Camera Control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom/Focus operation via
the control panel and how to create preset positions.
Preset Locations
On this page, you can create preset positions for the Network Camera to go to directly or patrol
consecutively from one position to another. A total of 128 preset positions can be congured.
Please follow the steps below to create preset positions:
1. Adjust the shooting area to a desired position using the buttons on the upper-right corner of the
window. You can also use mouse clicks on the view cell to move the camera shooting direction.
2. Click Set Current position as home or Restore home position to default to define your home
position.
3. Enter a name for the preset position, which allows for up to forty characters. Click Add to enable the
settings. The preset positions will be displayed under the Preset Location list on the left-hand side.
4. To add additional preset positions, please repeat step 1~3.
5. To remove a preset position, select its checkbox from the drop-down list and click Remove.
6. Click Save to enable the settings.
functions are the
same as the control
panel on home page
1
2
6
5
3