Vivotek PT8133 user manual Wps

VIVOTEK

WPS:

1.Make sure your AP (Access Point) and Operating System support WPS (Wi-Fi Protected Setup) functions. WPS enables easy setup with compatible APs.

2.Connect your camera using a LAN cable, open a web console, and enter the Configuration -> Wireless page. Select the WPS checkbox, and click the Save button.

3.The camera's blue LED should start flashing. Press and hold down both of the WPS buttons on your AP and your camera for at least 1 second. (Some router/AP will have a virtual button on their management software instead.) Refer to your AP's documentation for details using its WPS function. If your AP does not support WPS, configure your wireless connection manually.

4.Wait for 2 minutes with the onscreen progress bar. The camera should then reboot.When the progress bar disappears, disconnect your LAN cable. You can refresh or re-start your web console to see live video.

ADSL/Cable/Hub

12V 1.5A

ETHERNET

Wireless AP

WPS buttons

WPS

When WPS configuration is done, wireless connectivity will be established and the security encryption, such as WEP or WPA-PSK, will be synchronized with the AP. Use the IW2 utility to find the camera. As for IP setting, the camera's use of DHCP or static IP is determined by your configuration on the network camera via the web-based configuration of firmware. The camera's default is DHCP.

62 - User's Manual