Vivotek PT8133 user manual Vivotek

VIVOTEK

NOTE:

1.WPS may not work if your AP is configured with a "hidden" SSID.

2.If the camera can not detect an AP after 2 minutes, the wireless setup will be cancelled.

3.If a camera is assigned with a fixed IP outside the AP's network segment, wireless setup will fail.

4.A wired connection always has a higher priority. Unplug the LAN cable at an appropriate time for the wireless setup to take effect.

5.The camera also supports manual configuration of wireless settings, enter the SSID (Service Set Identifier) and security authentication password in a web console with the camera.

5-1. Enter the Configuration page -> Wireless.

5-2. Enter the SSID and password of your AP, select the Wireless mode as "Infrastructure."

5-3. Use the "ping <IP address> -t" command in a DOS prompt to observe wired connectivity. Click the Save button. When wired connection is discontinued, unplug the LAN cable.

5-4. After several seconds, the camera will switch to wireless connection. Disconnect and then connect the power cord to restart the camera, and you should be able to see live video from the web console.

6.Select "Ad-Hoc" wireless mode if you prefer direct connection with a PC without the intermediate AP or wireless router.

14 - User's Manual