VIVOTEK

Patrol Settings

You can select preset locations to arange the patrolling tour for the Network Camera. Please follow the steps below to set up a patrolling tour:

1.Click to select one or multiple preset locations by checking their checkboxes.

2.Click the >> (Move) button to move them to the Patrol locations column.

3.Click to select a position, and manually enter a Dwelling time for the camera to stay during an auto patrol. The default value is 5 seconds.

4.Repeat step 1 and 3 to select and configure individual patrol locations.

5.If you want to delete a selected location, select it from the list and click Remove.

6.Select a location and click Up or Down to rearrange the patrolling order.

7.Adjust the Auto pan/patrol speed. (1~5 scale determining how fast moving to the next position)

8.Click Save to enable the settings.

1

2

5

8

NOTE:

7

3

6

A patrol takes place by clicking the Patrol button on the home page, and ends when the last position is reached.

User's Manual - 81

Page 81
Image 81
Vivotek PT8133 user manual Patrol Settings