VXI user manual EX7000 Specifications, EX72SF

VXI Technology, Inc.

	EX7000 SPECIFICATIONS
GENERAL SPECIFICATIONS
PHYSICAL DIMENSIONS
EX71HD	19” (48.2 cm) width x 24.25” (61.6 cm) depth* x 1.75” (4.5 cm) height
EX72SF	19” (48.2 cm) width x 24.25” (61.6 cm) depth* x 3.50” (8.9 cm) height
EX7400	19” (48.2 cm) width x 24.25” (61.6 cm) depth* x 7.0” (17.8 cm) height
	* excludes coaxial connector protrusion from face of front and/or rear panels
CONNECTORS
Host interface	RJ-45 (CAT 5e) Ethernet (10/100T)
Trigger bus	Dual 25-pin mini D-sub
GP digital I/O	8 LVDS in/out, LXI Class A
	9-pin D-sub
AC power	8 TTL I/O
	IEC EN 60320 C13
RESET
	Momentary push-button LAN reset, available through rear panel access hole
POWER
Voltage	90 V ac - 264 V ac, 47 Hz - 63 Hz
Power	110 VA Max (EX71HD), 20 VA Max (EX72SF)
DIGITAL CONTROLLER BOARD (DCB)
PROCESSOR	MCF5272
SDRAM	32 MB
Flash ROM	8 MB
Single-command response time	< 3 ms

RELAY DRIVER BOARD (RDB)

RELAY POWER +5 V to +48 V

*Three power pins, each connected to four relay driver connections

RELAY DRIVERS 72 open-drain high-current sink on a standard board. Options available to replace some or all of the open drain outputs with TTL drivers. Expandable to 576. Twelve open-drain very high-current sink drivers for reset. Arranged as one drive line per relay driver connector as well as 12 lines together on one connector on J21.

MAXIMUM CURRENT SINK 200 mA (all channels ON) for 72 channels

410 mA (individual channels) for 72 channels

800 mA for 12 reset lines

TTL I/O

32 channels per board, expandable to 256

MODULE ID Rotary switch (0 through 7 identifies driver board in chain)

SOFTWARE

PROGRAMMATIC CONTROL IVI-COM and IVI-C API

IVI similar API for Linux DOS-based interactive command set

INTERACTIVE CONTROL

Embedded JAVA applet

CONFIGURATION TABLE

128 elements (power-on, last known, user-defined)

SCAN LIST

16k set-ups

14 EX7000 Series Introduction