WatchGuard Technologies V10.0 manual Distributing the Software and Profiles

Distributing the Software and Profiles

1You can choose to make the .wgx file read-only so that the user cannot change the security policy file. To do this, select the Make the MUVPN client security policy read-onlycheck box.

2Mobile VPN clients use shared Windows Internet Naming Service (WINS) and Domain Name System (DNS) server addresses. DNS changes host names into IP addresses, while WINS changes NetBIOS names to IP addresses. The trusted interface of the Edge must have access to these servers. Type a DNS server and WINS server IP address in the text boxes near the bottom of the Mobile User page.

Because the Mobile VPN client always uses a virtual adapter, you should not change the virtual adapter settings on this dialog box.This setting applies only to Mobile User VPN versions prior to 10.0. For version

10.0and later, it does not matter what you use for this setting because the Mobile VPN with IPSec software version 10.0 and later always uses a virtual adapter. See the Mobile User VPN Administrator's Guide for information about how this setting affects earlier versions of the Mobile User software.

Distributing the Software and Profiles

WatchGuard® recommends distributing end-user profiles by encrypted email or with some other secure method. Each client computer must have:

•Software installation package

The packages are located on the WatchGuard LiveSecurity® Service web site at: http://www.watchguard.com/support

Log in to the site using your LiveSecurity Service user name and password. Click the Latest Software link, click Add-ons/Upgradeson the left side, and then click the link for Mobile VPN with IPSec.

4 Mobile User VPN