![Top Bracket](/images/new-backgrounds/51226/5122623x1.webp)
|
| |
6 | Top Bracket | |
| ||
|
| |
Tools Needed: | Align | |
base with #6 hole in the end stile (See end | ||
Power Drill | ||
stile hole layout). Secure with | ||
7/16” Socket | (1) 1/4”- 20 x 7/8” self drilling screw. | |
Ensuring top bracket is level and aligned | ||
Driver | ||
with edge of section. Permanently fasten | ||
| ||
| top bracket with (4) 1/4”- 20 x 7/8” self | |
| drilling screws, one in each corner of the | |
| top bracket base. | |
| Remove the 1/4”- 20 x 7/8” self drilling | |
| screw installed in the | |
| the top bracket base. | |
| Loosely hand tighten top bracket slide | |
| to base with (1) 1/4”- 20 x 5/8” carriage | |
| bolts and (1) 1/4”- 20 flange hex nuts. | |
| Insert roller and repeat for other side. | |
| NOTE: For doors with a glazed top section | |
| (windows). Top strut may be mounted | |
| between #2 and #6 holes before top | |
| bracket is installed. See step 8 for | |
| installation. | |
|
|
#6 hole | top bracket | top section |
| base | |
|
| |
end stile |
| (4) |
|
| |
|
| drilling screw |
| (1) 1/4”- 20 | |
| flange hex | |
|
| nut |
| top |
|
| bracket |
|
| slide | top section |
(1) 1/4”- 20 x 5/8” | top | |
carriage bolt |
| |
bracket |
| |
|
|
base
top
bracket assembly
top section
7 | Step Plate | bottom | bottom |
| section | section | |
Tools Needed: | Locate the center most stile on the |
|
|
Pencil | bottom section of the door. Using the |
|
|
|
| ||
|
|
| |
Power Drill | the stile as a template, drill (2) 7/32” |
|
|
dia. holes through the section. Using |
|
| |
|
|
| |
5/16” Drill Bit | the previously drilled holes as a guide, |
| OUTSIDE |
| enlarge the holes from outside the door | OUTSIDE | STEP PLATE |
Phillips | to 7/16” diameter. Assemble the outside | STEP PLATE |
|
|
| ||
Screwdriver | and inside step/lift plates to the section |
|
|
| using (2) #8 x | Step Plate Outside |
|
|
|
| |
| NOTE: Do not drill through or enlarge | bottom | bottom |
| section | ||
| holes on the inside of the door. | section | |
|
|
|
NOTE: After completing this step, continue with Step 8 on page 13.
inside step | inside step | |
plate | ||
plate | ||
|
(2) #8 x
tapping screws
Step Plate inside
12
Please Do Not Return This Product To The Store. Contact your local
local yellow pages/business listings or go to the Find a Dealer section online at