Wayne-Dalton 46 installation instructions Vertical Track, Stacking Sections, Installation

11	Vertical Track
Tools Needed:	IMPORTANT: The tops of the vertical
	tracks must be level from side to side.
3/16” Drill Bit	If the bottom section was shimmed
	to level it, The vertical track on the
Power Drill	shimmed side must be raised the height
	of the shim.
7/16” Socket	Position the left hand vertical track assembly
Driver
	over the rollers of the bottom section. Make
Tape Measure	sure the counterbalance cable is located
	between the rollers and the door jamb. Keep
Level	track 5/8” from edge of door as shown in
	illustration.
Step Ladder	Drill 3/16” pilot holes for the lag screws.
	Loosely fasten jamb brackets and flagangle to
	the jamb using 5/16” x 2” lag screws.
	On the bottom jamb bracket, tighten the lag
	screw securing the bottom jamb bracket to
	the jamb. Make sure the 5/8” track spacing is
	maintained.
	Hang the cable drum over the flagangle.
	Repeat for the right hand side.

JAMB

BRACKET

fLAGANGLE

5/16 x 2” hex

head LAG

SCREWS

VERTICAL

TRACK

ASSEMBLY

BOTTOM SECTION

vertical

track

5/8”

roller

flagangle hole

selection

jamb bracket

5/16” x 2” hex head lag screw

INSTALLATION

12	Stacking Sections
Tools Needed:	NOTE: For door section identification see
	page 4.
Power Drill	NOTE: Make sure hinges are flipped down,
7/16” Socket	when stacking another section on top.
	Place rollers in hinge tubes of the second
Driver
	section (lock section).
	With assistance, lift the second section and
	guide rollers into the vertical tracks.
	Repeat for other section(s) except top
	section.
	Attach center hinge leaves to sections using
	1/4”-14 x 5/8” self tapping screws. Repeat
	for the upper hinge leaves.
	IMPORTANT: Push & hold the hinge
	leaves against section while securing
	hinges.
	NOTE: Install lock at this time (sold
	separately). See instructions in OPTIONAL
	SIDE LOCK INSTALLATION on page 32.

lock section

15

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com