Western Telematic PLS-345 manual Status Screens, Circuit Status Screen

6.The Status Screens

The PLS Status Screens are used to display current conditions of the three switched A/B circuits and the network interface. There are two status screens; the Circuit Status Screen (/S), and the Network Status Screen (/SN).

6.1. The Circuit Status Screen

The Circuit Status Screen lists the current A/B settings for the PLS-345's three switched circuits, and also summarizes user- selected parameters, such as Command Echo, Inactivity Timeout, and Command Confirmation.

As shown in Figure 6.1, the Circuit Status Screen lists the following items:

1.Site ID Message: The currently defined Site ID message. Note that the site ID message is defined via the General Parameters Menu (/G).

2.Ckt #: The circuit numbers for the PLS's three A/B circuits.

Physical Layer Switch v1.00			Site ID: PLS-345_TEST_IRVINE_CALIFORNIA
CKT#	From	To	POS MON Default
-----+	------------------	+------------------	+	-----	+	-----	+	---------
1	COMMON_LINE_1	LINE_B1		B				A
2	COMMON_LINE_2	LINE_A2		A		*		A
3	COMMON_LINE_3	LINE_A3		A		*		A
-----+	------------------	+------------------	+	-----	+	-----	+	---------
Command Echo:		On
Inactivity Timeout:		30 Min
Command Confirmation:		On
Automated Mode:		Off
Monitor Mode:		On
Monitor Input Level:		1 - High

"/H" for help.

Figure 6.1: The Circuit Status Screen

6-1