Network Status Screen, Port | Western Telematic PLS-345 specification

			Section 6: The Status Screens

Physical Layer Switch v1.00			Site ID: PLS-345_TEST_IRVINE_CALIFORNIA
NETWORK STATUS:		52-54-40-22-48-7a
TCB	SRC PORT	STATE	SOURCE IP ADDR
1	16128	Established	65.106.93.98
PORT	TCB	STATE
Telnet	1	Connected
PLS>

Figure 6.2: The Network Status Screen

6.2. The Network Status Screen

The Network Status Screen lists the TCP port number, source port, source IP address and other Network related parameters. Note that the Network Status Screen is used primarily for diagnostic purposes, for a listing of current network parameters such as the IP Address and Subnet Mask, please refer to the Network Parameters Menu. As shown in Figure 6.2, the Network Status Screen includes the following information:

1.Site ID: The currently defined Site ID message. Note that the site ID message is defined via the General Parameters Menu (/G).

2.MAC Address: The MAC Address assigned to the PLS Network Interface card is listed in the second line of the Network Status Screen, adjacent to the text which reads

"NETWORK STATUS."

3.TCB: Transmission Control Block (Always 1.)

a)SRC PORT (Source Port): The port number of the PC or terminal that has contacted the PLS via network.

b)State: The current status of the TCB connection.

c)Source IP Address: The IP Address of the network node that has currently accessed the PLS-345 Command Mode.

4.Port:

a)TCB: Transmission Control Block (Always 1.)

b)State: The current status of the Telnet Port.

6-3

Image 37

Western Telematic PLS-345 manual Network Status Screen, Port

Contents

PLS-345 Page Shock Hazard Do Not Enter Nameplate Power Warning Ventilation Enclosed Racks Table of Contents Application Examples Command Summary Introduction Monitor Mode Applications Typographic Conventions Front Panel Unit Description Back Panel Back Panel Unit Description PLS-345 Physical Layer Switch Users Guide Quick Start / System Overview $ telnet 192.168.168.168 Enter Modem & Console Port Access Factory set PLS Circuit Status Screen Command Help Screen System Mode Power Supply Connection InstallationInitialization Connecting the Network Cable Connecting Common and A/B LinesConnecting an External Modem Connecting a PC to the Console Port System Mode and User Mode SetUp and Configuration Communicating with the PLS-345 SetUp and Configuration PLS Command/Menu Conventions Defining General Parameters SetUp and Configuration PLS-345 Physical Layer Switch Users Guide SetUp and Configuration Circuit Parameters Menu Circuit Parameters Network Parameters Network Parameters Menu IP Security Implementing IP Security Example 1 Deny access to all hosts except Hardware Configuration Monitor ModeSelecting Monitor Mode Parameters Monitor Mode Parameters Menu Switch if Level 1 High Switch to Position B Return On Save Configuration Parameters Circuit Status Screen Status Screens PLS-345 Physical Layer Switch Users Guide Port Network Status Screen PLS-345 Physical Layer Switch Users Guide Operation Manual A/B Switching /A Command and the /B Command Code Activated A/B SwitchingEnter or /B n Enter Enter Command Confirmation Prompt /D Command Monitor Mode Sending Parameters to a File Saving and Restoring Configuration Parameters Restoring Saved Parameters Application Examples Monitoring Signal Drop and/or Power Loss AUX Port Connection Monitoring a Contact Monitoring a Switch or Relay Item 6 Circuits to Switch Enable the Monitor Mode at circuit Display Commands Command SummaryDisplay Help Screen Display Circuit Status SN Display Network Status Configuration CommandsView/Set General Parameters View/Set Circuit Parameters DL Download Configuration to File View/Set Monitor Mode ParametersView/Set Network Parameters Switch Circuit n to Line a Control CommandsSwitch Circuit n to Line B Reset Network Interface Set Circuits to DefaultCommand Format /D Enter Command Arguments Command Format /T Enter Command Arguments Exit/Disconnect Command Format /X Enter Command Arguments Console Port Interface Interface DescriptionsModem Port Interface Figure A.3 Common Ports and A/B Ports Common Ports and A/B Ports Switching SpecificationsSize Trademark and Copyright Information Customer Service Index Index-2 Page Sterling Irvine California 949 586-9950 Toll Free