Take Apart | Logic Board - 59 | |||
| Caution: Be careful that the logic board clears both the media |
| ||
| bay and the PC Card bay. | |||
| Replacement Note: The logic board will snap into place when | |||
| you align | |||
| 1 the I/O port connectors | |||
| 2 the metal prongs over the ledge for the PC Card bay and | |||
| the PC Card module’s sides under the ledge | |||
| 3 the notches near the media bay | |||
| Replacement Caution: Make certain that you insert the | |||
| infrared cable into the logic board connector correctly. | |||
| When the connection is straight, the line on the infrared | |||
| cable will align with the connector top. If the cable is | |||
| incorrectly connected, you can blow a (soldered) fuse on the | |||
| logic board. | |||
| Return Note: The entire PC Card module (including the white | |||
| metal shield) remains on the logic board for return to Apple. | |||
|
|
|
|
|
|
|
|
|
|
