
| Troubleshooting |
| Symptom Charts/Startup - 3 |
Hardware failure | 1 | Reset PRAM. | |
occurs | 2 | Remove floppy drive from media bay and restart computer. | |
error chord sequence | 3 | If startup sequence is normal, insert floppy drive and retest. | |
sounds after startup | Replace floppy mechanism. | ||
chord) | 4 | Disconnect hard drive cable and restart computer. If startup | |
|
| 5 | sequence is normal, reconnect cable and retest. |
|
| Replace hard drive. | |
|
| 6 | Replace logic board. |
Startup failure | Upgrade to System Enabler 1.2.1 or later. Refer to Apple | ||
occurs when using | Software Updates on Service Source Companion CD. | ||
minimum System |
|
| |
Folder and System |
|
| |
7.5.2. |
|
|