Whirlpool KEBS147D, KEBS247D Adjusting oven temperature, Press and hold Bake pad for Seconds

Using Your Oven

Adjusting oven temperature

Although your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven.

If, after using the oven for a period of time, you are not satisfied with the baking/roasting results, you can change the offset tempera- ture by following the steps below. The control will “remember” the selected offset even after the power has been interrupted or lost.

NOTES:

•On double ovens, upper and lower oven temperature may be adjusted indepen- dently. Press the Upper or Lower Oven pads.

•DO NOT measure oven temperature with a thermometer. Opening the oven door will affect the oven temperature and give you an inaccurate reading. Also, the thermometer temperature reading will change as your oven cycles.

•These examples are for double upper ovens only. Other ovens may look slightly different.

1. Press and hold Bake pad for

5 seconds.

Release the pad when a number and CAL appear on the temperature display and you hear a tone.

PRESS	YOU SEE
	O
	F
	COOK TEMP
to select oven (for	(factory setting of “0”)
double ovens)

PRESS

BAKE

Hold for

5 seconds

2. Set new offset temperature.

You can set the offset temperature adjustment as low as -35°F (-21°C) or as high as +35°F (+21°C). Each time you press the Bake pad, the displayed tem-

PRESS	YOU SEE
		NIGHT LIGHT DELAY
		O	SET	PROBE TEMP
BAKE			RAISING
		F
			BREAD		CHECK
		DEHYDRATE		CONVECTION	FOOD AT
		ON ENTER STANDARD COOK TIME
					CLOSE
	EASYCONVECT	COOK TEMP		CLEAN TIME	DOOR

perature will increase by 5°F (3°C). Each time you press the Broil pad, the displayed

OR

(example when making oven 10°F [or 5°C] hotter)

temperature will decrease by 5°F (3°C). (To determine the amount of adjustment needed, see the chart on page 23.)

NOTE: If there is no “F” after the tem- perature, you are in the Celsius mode.

BROIL

MAXI

ECONO

22