Whirlpool KEBS247D, KEBS278D Using Your Oven, Starting an operation, Selecting an oven, Stop Time

NOTE: To cancel the timer see page 16.

(double

ovens)

NOTE: You may hear a fan blowing in the oven even after you press the Cancel/Off pad. This is the cooling fan. It will turn off when the oven cools.

Changing audible signals Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.

To change pitch and loudness of key tone:

PRESS and hold for 5 seconds

7

A short tone will sound and “Snd” and “Hi” or “Lo” will appear on the display. Repeat the step above to change to the other setting.

8

OR

(single

ovens)

OFF

CANCEL

The Cancel/Off pad will cancel any function, except for the Clock and Timer functions. When you press the Cancel/Off pad, the small display will show the time of day, or if Timer is also being used, the time remaining.

Canceling an operation

Using Your Oven

Starting an operation

After programming a function, you must press the Start pad to start

START the function. If you do not press the Start pad within

5 seconds of programming, “START?” will show on the display as a reminder.

To turn on and off end-of-cycle tones and reminder tones (single or double ovens):

PRESS and hold for 5 seconds

COOK

TIME

To turn on and off all reminder tones (single or double ovens):

PRESS and hold for 5 seconds

TIMER

SET•START

To turn on and off all tones (double ovens)/to turn on and off key pad entry tones (single ovens):

PRESS and hold for 5 seconds

STOP

TIME

A short tone will sound and “Snd” and “On” or “OFF” will appear on the display to tell you the signals have been changed. Repeat the step above to turn the signals back on.

Selecting an oven

(double ovens)

To choose the oven you want to use, press the Upper Oven or Lower Oven pad.

Finding out which oven is in use

(on double ovens)

Press the Upper Oven or Lower Oven pad. Upper oven or lower oven information will be displayed and the outer oven cavity symbol for the oven being programmed will flash.