Whirlpool KEBS208D Place food in cold oven, Press Convect Full Meal pad. PRESSYOU SEE, Start oven

Using Your Oven

1. Place food in cold oven.

If you need the Temperature Probe for your cycle (settings 6 thru 0 in chart on page 28), insert probe into food. Place food in oven and plug probe into jack.

2. Press Convect Full Meal pad. PRESSYOU SEE

HR MIN MIN SEC

to select oven

(for double ovens) (“C” stands for “cycle,”

PRESS	“F” stands for “favorite”)
CONVECT
FULL
MEAL

3. Press desired Number pad.

Use the “Convect full meal chart” on page 28 as your guide for selecting a cycle.

NOTES:

•On double ovens, the cavity symbol flashes to tell you which oven you are setting.

•You can change the Convect Full Meal cycle any time before pressing the Start pad by repeating Step 3.

•You can program your own setting, for each oven in double ovens, which you can then select in the future by pressing just upper/lower oven Convect Full Meal and START. (See page 28 for more information.)

PRESS	YOU SEE
1
	HR MIN MIN SEC
	(example for cycle 1)
		NIGHT LIGHT DELAY
		O	SET	PROBE TEMP
			RAISING
		F	BREAD		CHECK
		DEHYDRATE		CONVECTION	FOOD A
		ON ENTER STANDARD COOK TIME			CLOSE
	EASYCONVECT	COOK TEMP		CLEAN TIME	DOOR

4. Start oven. PRESS

START

YOU SEE

NIGHT LIGHT DELAY

	O	SET	PROBE TEMP
		RAISING
	F
		BREAD
ON	DEHYDRATE		CONVECTION
	ENTER STANDARD COOK TIME
EASYCONVECT	COOK TEMP		CLEAN TIME

CHECK FOOD A

CLOSE DOOR

5. When the Convect Full Meal cycle is done:

Four tones will sound, followed by 4 reminder tones (unless they have been disabled), every minute until you open the door, remove the probe, or press the Cancel/Off pad.

YOU SEE

COOK TIME

(double oven display)

27