Whirlpool KEBS107D, KEBS247D, KEBS278D, KEBS277D, KEBS208D, KEBS177D, KEBS147D warranty Troubleshooting

	Troubleshooting
PROBLEM	CAUSE
Cooking results are not	• The oven is not level. (See Installation Instructions.)
what you expected	• The oven temperature seems too low or too high. See
	“Adjusting oven temperature” on page 22 to adjust oven
	temperature.
	• You did not preheat the oven before baking (if called for
	in recipe).
	• The recipe you are using may need to be altered to
	improve the taste or appearance of the food.
	• You are using a pan that is not the correct type or size.
	Refer to a reliable cookbook or recipe for recommended
	pan type and size.
	• There is not enough air space around pan when baking.
	Allow 11⁄2 to 2 inches (4-5 cm) of air space on all sides of
	pan. There must be a minimum space of 1 inch.
The display is	• There has been a power failure. Reset the clock.
showing “PF”	(See page 14.)
A letter followed by a	• Press Cancel/Off pad. If the code reappears, note the
number shows on the	code and call for service. (See Step 2 on pages 54 and 55.)
display (for example
“E3”, “F1”)
The key pads do not	• The Control Lock has been set. (See “Using the control
operate	lock” on page 9.) Turn off the Control Lock by pressing
	and holding the Control Lock pad (Number Pad 3) for
	5 seconds.
	• The Sabbath mode has been set (“Sab” appears on the
	display). Turn off the Sabbath mode by pressing and
	holding Number Pad 6 for 5 seconds.

If none of these items was causing your problem, see “Requesting Assistance or Service” on pages 54 and 55.

53