Cookingautomaticallyafter defrosting
The controls can be set so the microwave oven goes automatically from defrosting to the Cook cyde you have touched in. This example shows the use of the Meat Defrost cycle.
1.Put food in the oven and close the door.
2.Touch MEAT. The DEF 1 and 0.0 Indicators will come on and the Ibs Indicator will start to flash.
3.Touch Number Pads for the defrosting weight you want. The Display will show the numbers you touched ln the order you touched them. This example shows 2 Ibs.
4.Touch COOK. The Display will show the STAGE 1, 0, HI and % POWER Indicators, and the TlME Indicator will start to flash.
5.Touch Number Pads for the cooking time you want. The Display will show the numbers you touched In the order you touched them. This example shows 4 minutes, 30 seconds.
6.Select a Cook Power, To cook at HIGH power, skip to Step 8. To select another Cook Power, touch COOK POWER. The Display will show the STAGE 1 Indicator, and the % POWER Indicator will start to flash. This shows the oven is preprogrammed to cook at full (HIGH) power.
7.Touch a Number Pad for the Cook Power you want. The Display will show what you touched. This example shows you touched Number Pad 6 for 66% of full power.
8.Touch START. The DEF 1, % POWER and ‘19:OO~ Indicators will sfay on. All other Indicators will go off. The Display counts down the time to show how much time is left in the Auto Weight Defrost cycle.
When the defrost time ends, you will hear 2 tones and the Cook cycle will start.
The STAGE 1 Indicator will be on during the Cook cycle. The desired POWER Indicator will also be on lf you are using a Cook Power other than HIGH.
The Display counts down the time to show how much time is left in the second cycle.
When the Cook cycle ends, ‘End* will show on the Display and two short and one long tone will sound. (You can stop the tones by opening the door or by touching CANCEL.) “End”will remain on the Display until the door is opened or CANCEL is touched. The Display will then show the time of day.
17
