Info button
Use the Info button to select the menu items and do the settings.
–Turning the button to the right/left scrolls through the menus forward/ backward.
–The selected setting gets accepted by pressing the button.
Settings
You can make the settings for the different cleaning programs in the operator menu. Different parameters can be set based on the cleaning program. The settings are done using the Info button.
Operator menu
ÎRelease
ÎSet main switch to “1”.
ÎSet the traction switch to "1“ or program selection switch to the desired cleaning program (1...6).
The display shows the battery charging status.
ÎSelect the desired parameter by turning the Info button. The currently set value is displayed.
ÎPress Info button, the value/ bar flashes.
ÎReset the parameter by turning the Info button between "min" and "max".
ÎConfirm the changed setting by pressing the Info button or wait till the set value is automatically accepted after 10 secon- ds.
Note
If the selected parameter does not change within 10 seconds, then the display goes back to displaying the battery charging sta- tus.
The cleaning parameters can be set and are applicable to all programs.
All settings are saved even in the powerless state of the machine.
Reset parameters
ÎSet cleaning program wet scrubbing, suction, polishing, scrubbing or polish suction using the program selection switch.
ÎSelect the menu item "Factory setting" in the operator menu by turning the Info button
ÎPress Info button. The factory settings of all parameters are restored for each cle- aning program.
Adjustable | min:step:m | Remark |
parameters | ax |
|
|
|
|
Detergent | 0,5% : 0,5% | Ideal de- |
metering | : 3% | tergent |
(DOSE) |
| concen- |
|
| tration |
|
|
|
Only Saber | – | Power |
Compact 22 |
| Clean, |
SP: |
| Whisper |
FACT*) |
| Clean, |
(brush speed) |
| Fine Cle- |
|
| an |
|
|
|
Cleanspeed | 0 : 1 : 5 | Driving |
|
| speed |
*) The cleaning performance can be set in 3 stages:
–Fine Clean: Lower brush speed for remo- ving the gray film on fine stone floors.
–Whisper Clean: Medium brush speed for regular cleaning with reduced noise le- vel.
–Power Clean: High brush speed for poli- shing, crystallising and sweeping.
English 13
