ÎLet off water by opening the dosage de- vice at the discharge hose.
ÎThe rinse the dirty water reservoir with clear water.
Emptying the fresh water tank
ÎRelease the coupling at the upper end of the fill level display.
ÎLower the hose for the fill level display into a suitable collector and drain off li- quid.
ÎEngage the coupling on the appliance again.
Transport
ÎIf you want to transport the appliance on a vehicle secure it from slipping.
To reduce the required space the push handle can be turned to the front:
ÎRelease the star grips of the push handle fastening.
ÎTurn the push handle to the front.
Maintenance and care
Danger
Risk of injury. Turn the program selection switch to "OFF" and disconnect the plug be- fore performing any works on the appliance. For BR...W Bp also turn the key switch to "0" and press the emergency stop switch.
Warning
Risk of damage to the appliance on account of water leakage. Drain out dirty water and the remaining free water before wokring at the machine.
Maintenance schedule
After the work
Warning
Risk of damage. Do not wash down the ap- pliance with water and do not use aggressi- ve detergents.
ÎDrain off dirty water.
ÎCheck the lint filter, clean if required
ÎClean the outside of the appliance with a damp cloth which has been soaked in mild detergent.
ÎClean the squeegee blades and the wiping lips, check for wear and replace if required.
ÎCheck the brushes for wear, replace if required.
ÎCharge battery if required.
Monthly
ÎDuring long operating pauses: Carry out refill charging for the battery.
ÎCheck battery pole for oxidation; brush it if required and lubricate it using pole grease. Ensure that the connection ca- ble sits firmly.
ÎCheck the acid density of the cells if the batteries are not
ÎCheck the condition of the seals between dirty water reservoir and cover, replace if required.
ÎClean the brush tunnel (only Saber Com- pact 22 SP).
ÎRemove the cover for water supply at the cleaning head and clean the canal. (only Saber Compact 22 SP)
ÎClean the connection to the detergent bottle with a wet piece of cloth.
After 400 operating hours or once a year
ÎReplace pump hose of the metering pump.
Yearly
ÎHave the prescribed inspection carried out by the customer service.
16English