Windsor 22 SP manual Errors with display, Overload, Display, Remedy

Errors with display

Overload	Display	Error	Remedy
display
Perma-	Pcb. Störung=4	Defective electronics	Call customer service.
nent light	Pcb. fault=4
blinks	Bürstm.Störung=1	Short circuit in the	Call customer service.
once	Brushmot.fault=1	brush motor
	Saugtb.Störung=1	Short circuit in vacu-
	Vac.mot. fault=1	um motor
	Ventil.Störung=1	Short circuit in soleno-
	Valve fault=1	id valve
	Fahrmt.Störung=1	Short circuit in drive
	Drivemot.fault=1	motor
blinks	Bürstm.Störung=2	Cable rupture in the	Call customer service.
twice	Brushmot.fault=2	brush motor
	Saugtb.Störung=2	Cable rupture in vacu-
	Vac.mot. fault=2	um motor
	Ventli.Störung=2	Cable rupture in sole-
	Valve fault=2	noid valve
	Fahrmt.Störung=2	Cable rupture in drive
	Drivemot.fault=2	motor
blinks th-	Heiss, abkühlen!	Temperature in the	Let the electronics system cool
rice	Hot, let cool!	electronics system is	down for at least 15 minutes.
		high.
	Saugtb.Störung=3	Overload vacuum mo-	Turn the program selection
	Vac.mot. fault=3	tor	switch to OFF or Drive. Then
			select again the cleaning pro-
	Bürstenüberlast!	Overload on brush
	Brush Overload!	motor	gram. If the fault recurs, call
			customer service.
	Fahrmt.Störung=3	Overload drive motor
	Drivemot.fault=3
blinks four	Prüfe Battspanng	Battery voltage is not	Call customer service.
times	Check Battery!	between 17 and 33 V
		Battery voltage is too	Stop charging. You can still use
		high while charging	the machine; however, call Cu-
			stomer Service
	Batteriefehler!	Battery fault
	Battery fault!
	Notaus-Schalter!	Emergency-stop but-	Release emergency-stop but-
	Emergency button	ton has been pressed	ton. .
		while charging the bat-
		tery.

English 19