Windsor 22 SP Setting the Squeegee Tool, Traction drive, Factory setting, Inclination, Cleanspeed

Factory setting Inclination

The table given below gives details of the factory settings of the parameters for the cle- aning programs. If no values are entered, then the respective parameter cannot be set in the given cleaning program.

	Detergent metering		Cleanspeed		FACT (brush speed)
Scrubbing suction	1		3		P
Wet scrubbing
Dry vacuum cle-		–			–
aning
Polishing					P
Polish suction
Driving				–	–

*) Only Saber Compact 22 SP: P=Power Clean

Setting the Squeegee Tool

Oblique position

To improve the vacuuming result on tiled floors the squeegee tool can be turned to an oblique position of up to 5°.

ÎRelease the wing nuts.

ÎTurn the squeegee tool.

ÎTighten the wing nuts.

14English

If the results are is unsatisfactory the inclina- tion of the straight squeegee tool can be mo- dified.

ÎRelease the wing nuts.

ÎTilt the squeegee tool.

ÎTighten the wing nuts.

Traction drive

The appliance is equipped with an auxiliary traction drive with free wheel. The appliance can also be moved by hand on account of the free wheel.

Program selection switch in "Driving" position:

ÎRelease emergency-stop button by turning.

ÎTurn the main switch from position 0 to 1.

ÎSwitch on "traction" button.

Display and battery indicator display are ac- tivated.

ÎPress control switch.

The appliance accelerates and then drives at the transport speed (4 km/h / 2.5 mph))

ÎRelease the control handle. The appliance brakes.

Program selection switch to cleaning program (position 2...6)

ÎRelease emergency-stop button by turning.

ÎTurn the main switch from position 0 to 1. Display and battery indicator display are ac- tivated.