Woodstock W1677, W1711 owner manual Motor shipping brace

W1677/W1711 10" Table Saw

5. Mount the switch brace, as shown in Figure 21, using the table mounting fasteners on the top end and the switch mounting fasteners on the bottom end.

Figure 21. Switch brace installed.

6. Install the handwheel over the threads, screw the lock knob into the center, and attach the handle to the handwheel, as shown in Figure 22.

Figure 22. Installing handwheel, lock knob

and handle.

7. Mount the dust port onto the cabinet stand with the four 10-24 x 3⁄8" tap screws, as shown in Figure 23.

Figure 23. Installing dust port.

8. Remove the motor shipping brace, shown in Figure 24, then replace the fasteners that held the brace back into the hole from which they came.

Figure 24. Motor shipping brace.

-19-

SETUP