Woodstock W1754S owner manual Extension Wings, Extension wing fasteners Leveling controls

W1754 20" Planer With Mobile Base

Extension Wings

SET UP

Extension wings are heavy and could cause per- sonal injury if dropped during installation. Have an assistant hold the table while you fasten it to the planer.

To attach the table extension wings, do these steps:

1.Install the M8-1.25 x 20 set screws in the holes in the bottom of the wings (Figure 5).

2.With the help of an assistant, attach the table extension wings to the planer table (Figure 5) with the M8-1.25 x 35 hex bolts. Finger tighten the bolts for now.

3.Check table-to-extension wing alignment (Figure 6) with a straightedge and adjust the leveling set screws until the table and wings are flush.

4.Tighten the hex bolts.

-12-

Hex Bolts

Set Screws

Figure 5. Extension wing fasteners and

leveling controls.

Figure 6. Example of leveling extension

wings and table.