TC2 204060 Series BattChg Owners Guide.book Page 4 Friday, July 8, 2011 11:44 AM
Truecharge 2 Battery Charger Features
Item | Description |
5AC wiring compartment cover provides the installer with easy access to the AC wiring compartment, to allow for a trouble free installation. Remove and replace when installing the product.
6DC ground stud for connecting the charger’s chassis to ground.
Rear Panel
This section describes the parts of the rear panel of the Truecharge2 Battery Charger.
| 3 | 40 A model (TC4012) | |
8 7 | 4 | shown. Other models | |
may vary. | |||
|
9
Item | Description |
|
|
1 | BTS port- battery temperature sensor port |
|
|
2 | Communication port - remote panel port |
|
|
3 | Battery positive (+) for bank 3 (6 mm stud) |
|
|
4 | Battery positive (+) for bank 2 (6 mm stud) |
|
|
5 | Battery positive (+) for bank 1 (6 mm stud) |
6Battery negative
7Air vents - located inside is the fan assembly
8AC wiring compartment
9AC pigtail wiring - line, neutral, and ground input wires
5 | 2 | |
6 | ||
1 | ||
| ||
Figure 2 | Truecharge2 Battery Charger Rear Panel | |
4 | Truecharge2 Series Battery Charger Owner’s Guide |
