TC2 204060 Series BattChg Owners Guide.book Page 52 Friday, July 8, 2011 11:44 AM
Troubleshooting
Symptom
The Truecharge2 Battery Charger appears to be taking too long to charge battery. Ready indicator LED does not illuminate after 24 hours of charging.
Symptom
The Truecharge2 Battery Charger appears to have quickly charged the battery. Ready indicator LED illuminates sooner than expected.
Possible Cause |
| Solution |
| Possible Cause | Solution |
| |||||
|
|
|
| ||
|
| Battery capacity is too low for | Use a lower capacity charger. | ||
|
|
|
| ||
Battery capacity is too high for |
| Use a higher capacity charger. |
| the Truecharge2 Battery Charger | Using the optional remote panel (if |
the Truecharge2 Battery Charger |
|
|
| model. | installed), reduce the output current |
model. |
|
|
|
| delivered to the smaller battery. |
Load connected to battery is |
| Disconnect all loads or switch loads off. |
| Battery has a damaged cell or | Replace battery. |
draining charge current so that |
|
|
| has reached the end of its useful |
|
battery does not recharge. |
|
|
| life. |
|
Battery has a damaged cell or |
| Replace battery. |
|
|
|
|
|
|
| ||
has reached the end of its useful |
|
|
|
|
|
life. |
|
|
|
|
|
The remote panel Max Output |
| Increase the Max Output setting. |
|
|
|
setting is too low for the battery |
|
|
|
|
|
capacity. |
|
|
|
|
|
|
|
|
|
|
|
|
| 52 |
|
| Truecharge2 Series Battery Charger Owner’s Guide |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
