BRIDGE and BRIDGE EXIT
Raising the bridge lid
Release the lid by rotating the center catch counter clockwise.
Raise the bridge lid.
1.If the document is visible ...
2. ... and has not entered the accordion folder, open the bridge lid by disengaging the catch in the center of the forward rail, then pull the document clear in the normal direction of print flow. Close and lock the bridge lid.
... and is partially within the accordion folder, open the bridge lid then pull the document back out of the accordion folder. Close and lock the bridge lid. (If the folding process had begun before the jam occurred, it may be necessary to clear the paper from the accordion folder, see “Accordion Fold” below.)
3.If the document is not visible, close and lock the bridge lid, then raise the bridge to the vertical position.
Unlocking the bridge
A knurled knob on the right side of the tower, adjacent to the operator’s control panel, holds the bridge in the down position. Rotate the knob clockwise two or three turns to release the bridge, then gently raise the bridge as shown.
2750 op#2 R3.doc | Page |
