Main control panel
The main control panel is located on top of the tower section of the accordion unit. It comprises five push buttons for fold selection and
In normal operations the folder will be connected to a host controller and the display will read ONLINE. Fold selections are made through the host controller. Additionally the host coordinates shut down and job recovery functions. If a fault occurs, or an interlock is opened (e.g., by removal of a cover panel), the display indicates the problem's location. Additionally, the technician may use the display to list machine settings, review recent error conditions, and to actuate various motors and solenoids for setup purposes.
When the folder is not connected to a host controller, the fold programs available to the operator are shown on the display in groups of four, the current selection being marked with an asterisk.
Handfeed
Pressing the HANDFEED button on the control panel activates the
For hand feeding, the print must be image down, with short edge leading. Bookfolding is not possible with hand feeding.
Receiver Advance
Pressing the green RECEIVER ADVANCE button advances the High Capacity Print Receiver (optional, except on Fold System 40) for easy removal of the folded prints. Pressing this button also resets the Receiver full counter. When the High Capacity Print Receiver is installed as an option the key cap is replaced with a green one.
Note: The folder assumes that all sheets have been removed from the receiver after the button is pressed. This action resets a software “print counter” used to determine when the receiver reaches a full condition.
2750 op#1 R3.doc | Page |
