LED | Description |
|
|
If you press the 
button in Ready mode, this LED is on
and the Toner Save mode is enabled.
If you press this button once again, this LED is off and the Toner Save mode is disabled.
If the | and | LEDs blink, your system has some |
problems.
To solve the problem, see “Troubleshooting Error Messages” on page 5.17
Cancel( |
|
|
| ) button |
|
| |
|
|
|
|
|
|
|
|
Function |
|
|
|
| Description |
|
|
|
|
| |||||
Printing demo page | In Ready mode, press and hold this button for about 2 | ||||||
| seconds until all LEDs blink slowly, and release. | ||||||
|
|
| |||||
Manual feeding | Press this button each time you load a sheet of paper in the | ||||||
| tray, when you select Manual Feed for Source from your | ||||||
| software application. |
|
| ||||
| For detailed information, see “Using Manual Feed Mode” on | ||||||
| page 3.7. |
|
|
|
|
| |
|
|
|
|
|
|
|
|
Canceling print job | Press this button during printing. The |
| LED blinks | ||||
| |||||||
|
| ||||||
| while the print job is cleared from both the printer and the | ||||||
| computer, and then return to Ready mode. This may take | ||||||
| some time depending on the size of the print job. | ||||||
| In Manual Feed mode, you can’t cancel the print job by | ||||||
| pressing this button. |
|
| ||||
| For detailed information, see “Using Manual Feed Mode” on | ||||||
| page 3.7. |
|
|
|
|
| |
|
|
| |||||
Toner Save mode | In Ready mode, press this button to turn the Toner Save | ||||||
on/off | mode on or off. |
|
| ||||
| For detailed information, see Software User Guide and | ||||||
| page 4.5. |
|
|
|
|
| |
|
|
|
|
|
|
|
|
1
INTRODUCTION 1.7
