Product overview

Operator Guide

Figure 3-4. Trays 1- 4

Trays 1 - 4

The Paper Trays hold up to 500 sheets of 20 lb (75 gsm) stock each. You can adjust the trays to hold many sizes of paper, from

5.5x 8.5 inches (140 x 216 mm) up to 11 x 17 inches (279 x 432 mm or A3). To handle 12 x 18 inch paper, a tray must be specially set up. Please contact the Xerox Welcome Centre to handle this size paper. If you wish to dedicate a tray permanently to handle this size paper please contact the Xerox Welcome Center. Refer to the chapter on Paper and Stock for a listing of acceptable stock and paper sizes, orientations, and weights.

NOTE: To achieve the maximum copying speed, paper should be loaded Long Edge Feed in the paper trays whenever possible.

Bypass tray (tray 5)

The Bypass Tray (Tray 5) is an additional paper tray designed for quick and easy loading of both standard and non-standard paper. It can physically extend to accommodate different stock sizes and orientations. You can load a maximum of 50 sheets of standard weight 20 pound (75 gsm) stock. If using a heavier stock, fill the tray only to the maximum-fill line.

The Bypass Tray has a capability of 4 to 12 inches (102 to 305 mm); 5.83 to 18 inches (148 x 457 mm).

The Bypass Tray can also hold non-standard size and weight paper such as transparencies, labels, covers, index, and bond paper. The Bypass Tray is shown below in Figure 3-5.

3-4

DocuTech/DocuPrint 75/90 and DocuPrint 75 MX

Page 32
Image 32
Xerox 75 MX manual Trays 1, Bypass tray tray