Xerox 75 MX manual Pre-printed, Letterhead, Reinforced Mylar, Edge, Card stock, Tabs

Paper and other stockOperator Guide

Table 5-6. Recommendations for loading special stock

Stock Type	Common Use		Recommendation
Pre-printed and	Common	•	Use ultra-violet cured or
letterhead	correspondence,		oxidative inks to extend the life
	mailings and		of the Feed Roll Cartridges.
	advertising	• Load face up in Trays 1-4.
	materials
		• Load face down in Trays 5-6.
Reinforced Mylar	Ringed binders	•	Load reinforced edge on the
edge			right in Trays 1-4.
3 or 4 holes		•	Load reinforced edge on the
			left in Trays 5-6.
		• Use long-edge feed only.
Card stock	Covers, signs	•	Feed from the Bypass Tray for
			best results.
Tabs	Separators within	•	Use the Tab Tray insert. Can
	a document		be obtained from your Sales
			Representative at no charge.
			Part number 98K87320.
		• Feed from trays 2, 3, and 4
			only.
		• Load with the tabs on the right.
Transparencies	Presentations	•	Use clear or white-striped
			transparencies. Do not use
			paper-backed transparencies.
		• Feed from the Bypass Tray
			(Tray 5) preferred.
		• Refer to the label on the tray
			for the orientation of striped
			transparencies.
		•	When using transparencies
			with removable stripes, load
			with the stripe up in Tray 5 and
			the stripe down in Tray 1.
		•	Do not duplex.

5-10 DocuTech/DocuPrint 75/90 and DocuPrint 75 MX