Product overview

Operator Guide

Insert paper as shown. The Bypass Tray extends to accommodate paper that is physically longer than the tray. Simply pull out the extension bar. Do not load paper above the maximum fill line.

Loading paper in the High Capacity Feeder (Tray 6)

To load paper, open the cover and wait for the tray to lower. When the paper has been loaded, close the cover to raise the tray. The High Capacity Feeder is shown in Figure 3-8.

Figure 3-8. Loading Trays 5 and 6

Insert paper for the

Bypass Tray here.

Pull the Extension

Bar to extend the

Bypass Tray

Insert paper for the

High Capacity Feed

Tray here

Changing the Tray 6 settings

You can set Tray 6 to hold either A4 or 8.5 x 11 inch paper.

An example of changing the tray setting from 8.5 x 11 inches to

A4 is shown in Figure 3-9.

3-8

DocuTech/DocuPrint 75/90 and DocuPrint 75 MX

Page 36
Image 36
Xerox 75 MX manual Loading paper in the High Capacity Feeder Tray, Changing the Tray 6 settings, Bypass Tray here