Xerox 75 MX Recommendations for loading special stock, Hole-punched, Or 4 holes, Perforated

Operator Guide Paper and other stock

The printer performance for new and recycled 8.5 x 11 inches (216 to 279 mm) or A4 paper for various weights is shown in Table 5-5.

Table 5-5. Printer performance for new and recycled plain paper

Paper Weight
Throughput Material 8.5 x 11 in. or A4	Rating	Note
Less than 16 lb or 61 gsm	x
Between 16-20 lb or 61-75 gsm	o
Between 20-32 lb or 75-120 gsm	l
Between 32-110 (index) lb or 120-203 gsm	u	l
Greater than 110 (index) lb or 203 gsm	x

Recommendations for loading special stock

The common uses and the special requirements for the variety of stock types that the printer can accommodate are shown in Table 5-6.

Table 5-6. Recommendations for loading special stock

Stock Type	Common Use	Recommendation
Hole-punched	Ringed binders	• Use long-edge feed paper for
3 or 4 holes		best imaging speed.
		• Load with holes on the left in
		Trays 5-6.
		• Load with holes on the right in
		Trays 1-4.
NOTE: Cannot
Dual Staple due to
hardware
limitations. Dual
stapling drilled
stock will cause
jams in the
finisher.
Perforated	Pages for partial	• Where possible, load with the
	removal, such as	perforations parallel to the
	order forms and	feed direction.
	receipts

DocuTech/DocuPrint 75/90 and DocuPrint 75 MX 5-9