Maintenance | Operator Guide |
•The power cable is damaged or frayed.
•A wall panel circuit breaker, fuse, or other safety device has been tripped.
•Liquid is spilled into the equipment.
•The equipment is exposed to water damage or flood.
•Any part of the equipment is physically damaged.
Printer faults
Occasionally, a fault will occur at the printer that may prevent you from using the printer, such as:
•Out of Paper
•Low Dry Ink
•Module/Cartridge end of life
•Paper Jam
Clearing printer faults
Instructions for clearing faults will be displayed on the controller.
Simply follow the instructions.
NOTE: For detailed information on clearing the printer faults, refer to the DocuSP
Paper jams
When a paper jam occurs, the controller automatically displays a fault window that lists individual faults. If you choose to display additional information about a given fault, the system will then display instructions or graphics that show the required actions. After the jam is cleared, follow any additional displayed instructions.
If the jam occurred in the middle of your job, the printer will automatically recover and reprint the sheets that were jammed.
NOTE: When removing jammed sheets from the printer, use the green handles and knobs.
The jam clearance areas are shown in Figure
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX |