Replacing the Laser Print Cartridge

6 Place the cartridge on a flat surface, hold it firmly with one hand and with the other hand grasp the end tab of the sealing tape and pull the tape straight out horizontally.

If pulled at an angle, the tape may break. After pulling out the tape, do not shake the cartridge or subject it to shocks.

7 Holding the cartridge as shown, lower it into the printer,

inserting the cartridge’s two projecting parts into the printer’s guide channels.

Be sure to push the cartridge all the way into the printer.

8

Slowly close the front cover. Press the center part of the

 

top cover until it latches into place.

9

If the envelope feeder was removed, reinstall it and power

 

on the printer.

10

Check the Control Panel display. Wait until Ready is

 

displayed. If an error message appears, refer to Table 5.1

 

on page 5-4for instructions.

11

Recycle the used cartridge using the packaging from the

 

new cartridge, following the directions provided.

Chapter 4: Maintaining the Printer 4-5

Page 113
Image 113
Xerox N2125 manual Be sure to push the cartridge all the way into the printer