Setup (continued)
7Turn the WorkCentre power switch on. The switch is located on the rear of the machine, next to the printer ports. Pressing the right, outer side turns the power on; pressing the left, inner side turns the power off.
|
|
|
|
|
| Power switch | |
| The Control Panel Display will show |
| in a scrolling manner while | ||||
8 | 000 | ||||||
| the machine is initializing. |
|
|
|
| ||
|
|
|
|
|
| ||
9 | The Display will show | 001 | when it is ready for use. Control Panel | ||||
| mode indicators are set to default values for this setup procedure. When | ||||||
| you first power the machine on and there are no cartridges installed, you | ||||||
| will see the error code |
| E02 |
| shown in the Display. This means there is | ||
| no left (color) cartridge | installed. | This error code will disappear when you | ||||
| start the next procedure. |
|
|
|
|
10 Getting Started