Making a single Copy
Follow this procedure when you need to make a single copy of your original document.
1Make sure the WorkCentre is powered on. Load paper in one of the
paper feeders. The Display should show the message 001 .
2Open the platen cover. Make sure the glass is clean. Load the document on the document glass facing down and pushed against the left and rear guides.
3Close the platen cover.
NOTE:: If you do not close the platen cover or the document is not evenly in contact with the document glass, scanning quality will be severely reduced.
4Press the Start button. The machine will make one copy with the following features:
Normal resolution
Normal contrast
Plain paper type
100% copy size (same as original)
OSingle copy Color mode
5For other copy features and functions, see the next section Using the Copy Menu Features.
Copying 37
