10
Press Menu until the code
U01
If print quality still has not improved, replace the ink cartridge.
Repeat the nozzle test. See Cleaning the Print Nozzles.
Close the cartridge compartment lid/support and scanner module.
Allow the copper-colored area to dry, then reinstall the ink cartridge
6
7
8
9 If the line is still broken, clean the print cartridge carrier contacts in your machine. See Cleaning the Cartridge Carrier Contacts.
NOTE: If you are cleaning a color ink cartridge, be especially careful to wipe the nozzles in only one direction so the colors do not mix.
Remove the ink cartridge. See Replacing the Ink Cartridge.
Press Start. The cartridge carrier assembly will move into the open area.
appears in the Display.
2
3
4
5 Use a clean, lint free cloth, dampened with distilled water only, to gently clean the entire copper colored area, including the nozzles and contacts. To dissolve any dried ink, hold the damp cloth against the nozzles for about three seconds. Gently blot and wipe dry.
Wiping the Ink Cartridge Nozzles and Contacts
If print quality does not improve after repeating the Print Head Nozzle procedure, the problem may be caused by dried ink on the ink cartridge:
nozzles
3contacts
carrier contacts in the printer
Follow this procedure:
1 Lift the scanner module. Lift the cartridge compartment lid/support up so the scanner module rests on the top edge of the lid/support.
Maintenance 47
