Xerox XK35C Cartridge Alignment, To Align the Cartridge from your PC, Click Align Cartridges

Cartridge Alignment

You should print the cartridge alignment test if vertical lines or characters appear crooked. The cartridge alignment test will straighten the vertical lines.

To Align the Cartridge from your PC:

1Open the Xerox WorkCentre Control Program on LPT1. Refer to Starting the Xerox WorkCentre Control Program and to Using the Cartridges Tab.

2Click Align Cartridges.

3The printer feeds a sheet of paper and prints the alignment test pattern.

4Examine the test print.

If the vertical lines are straight, no adjustment is needed.

If the lines are not straight, select the number in which the lines appear the straightest and click OK.

To Align the Cartridge Using the WorkCentre Control Panel:

1Press the Menu button on the Control Panel repeatedly until the Message Code U02 appears in the Display.

2Press Start.

NOTE: The machine will time out after one minute if Start is not pressed, and will return to Standby Mode. The Display will then show 001 . Press Menu repeatedly until you see the code U02 displayed, then press Start to repeat the cartridge alignment process.

3An alignment test pattern sheet will print during which time the Display

will show L-P . Review this sheet in response to the next series of six Display messages.

ª

Maintenance 51