Xerox XK35C, XK25C manual Installing & Aligning the Ink Cartridges continued

Installing & Aligning the Ink Cartridges (continued)

12If you pressed Start to either of the two messages, the alignment procedure will start. An alignment test pattern sheet will print during

which time the Display will show L-P . Review this sheet in response to the next series of six messages. See an illustration of the alignment sheet in Section 5 Maintenance/Cartridge Alignment.

13For the first alignment message, the Display will show “A” plus a number,

as, A15 . Look this number up on the alignment sheet. If the printed lines associated with this number are aligned better than any of the other printed lines in group “A”, press Start. If there is another set of printed lines that are aligned better, press the appropriate Copy Size/Scroll button until the number associated with the best-aligned set appears in the Display. Press Start.

NOTE: The machine will time out after one minute if Start is not pressed, and will return to Standby Mode. The Display will then show 001 . Press Menu repeatedly until you see the code U02 displayed, then press Start to repeat the cartridge alignment process.

14The Display will show the next alignment message in the series. Repeat step 13 for these remaining five steps, from “B” through “F”.

15The Ink Cartridge alignment is completed. Proceed to the next section Using the Automatic Paper Feeder.

Getting Started 13