Xerox XK35C, XK25C manual General Installation, Installation for Windows 3.1X continued…

General Installation

1Make sure the WorkCentre is connected to your PC.

2Power on the WorkCentre.

3Turn on your PC and start Windows.

4Insert the WorkCentre CD-ROM into your CD ROM drive.

Installation for Windows® 3.1X continued…

5From the File menu of the Windows Program Manager, select File>Run.

6Type d:\Xinstall.exe (replace "d" with the letter designation of your PC’s CD-ROM drive), and if necessary,click OK. Continue with step 7.

Installation for Windows® 95/98 or Windows® NT 4.0 continued…

NOTE: For USB (Windows 98 only):

a)You will see an Add New Hardware dialog. Select NEXT.

b)Follow screen instructions to load USB driver. When asked for USB driver source, point to Xerox CD. Continue with screen instructions.

c)Go to Step 5 to manually install the XK Series printer and TWAIN drivers.

5If AutoPlay is not enabled to automatically recognize the CD-ROM, select Start>Run (Windows 95/98 and NT 4.0).

6Type d:\Xinstall.exe (replace "d" with the letter designation of your PC’s CD-ROM drive), and if necessary, click OK. Continue with step 7.

General Installation continued…

7The WorkCentre software installation program will begin. Follow the on- screen instructions for the rest of the installation.

8Restart your PC to complete the installation process.

Getting Started 23