8Insert the ink cartridge in the cartridge holder, then push the ink cartridge firmly to the rear of the machine until it clicks into place.
If the ink cartridge moves loosely in the carrier, it has not clicked into place. Repeat this step.
9If you changed the left cartridge (colour) press Start, otherwise press
Stop. The message will then change to
If you pressed Start to either of the two LED messages, the alignment procedure will start. An alignment test pattern sheet will print during which time the display will show
10Close the cover and proceed to the Cartridge Alignment procedure. Use that particular procedure named To Align the Cartridge Using the WorkCentre Control Panel, starting with step 4.
NOTE: If you are interrupted and leave the print carrier in the left side access location for more than 30 minutes, the print cartridge carrier moves to the right hand standby position.
