Yamaha RX-V2500 Top display appears, Press k / n repeatedly to select Auto Setup, then press h

				AUTO SETUP
Starting the setup
		4 Press k / n repeatedly to select Setup Menu,
For best results, make sure the room is as quiet as possible		then press h.
during the auto setup procedure (YPAO). If there is too
much ambient noise, the results may not be satisfactory.			Information
y
If your subwoofer can adjust the output volume and the crossover			Setup Menu	Wiring
frequency, set the volume to about half way (or slightly less) and			Setup Type	Distance
set the crossover frequency to the maximum.			Start	Size
	CROSSOVER/
VOLUME	HIGH CUT

MIN MAX MIN MAX

Subwoofer

1Switch on this unit and video monitor.

2Set AMP/SOURCE/TV to AMP, then press TOP on the remote control.

The top display appears.

AMP	TOP
SOURCE	TITLE
TV

Stereo/Surround
Input Select	Sound
Manual Setup	Basic
Auto Setup	Option
System Memory

3Press k / n repeatedly to select Auto Setup, then press h.

ENTER ENTER

Input Select
Manual Setup	Information
Auto Setup	Setup Menu
System Memory	Setup Type
Audio Info.	Start

5Press k / n repeatedly to select Wiring,

Distance, Size, Equalizing or Level, then press h.

	Skip	Wiring	Skip
Wiring	Check	Distance	Check
Distance		Size
Size		Equalizing
Wiring		Distance
Distance	Skip	Size	Skip
Size	Check	Equalizing	Check: Natural
Equalizing		Level	Check: Flat
Level			Check: Front
	Size
	Equalizing	Skip
	Level	Check

6For Wiring, Distance, Size or Level, select:

Check	To automatically check and adjust the selected
	item.
Skip	To skip the selected item and perform no
	adjustments.

y

When using THX speakers, select Skip for Size and make sure that “Small” or “Small x2” is selected in Speaker Set (page 61) and that “80Hz (THX)” is selected in Bass Cross Over (page 63).

PREPARATION

English

27