Yamaha RX-V2500 For Equalizing, press k / n to select, Press n to select Start, then press ENTER

AUTO SETUP

For Equalizing, press k / n to select:

Skip		To skip the selected item and perform no		9 Press n to select Start, then press ENTER.
		adjustments.		Loud test tones are output from each speaker and
Check: Natural To average out the frequency response of all
				“Measuring” appears during the auto setup
		speakers with higher frequencies being less
				procedure.
		emphasized. Recommended if the “Flat”
		setting sounds a little harsh.
					Setup Menu
Check: Flat		To average the frequency response of all
		speakers. Recommended if all of your			Setup Type
		speakers are of similar quality.			Start	Press ENTER
Check: Front		To adjust the frequency response of each
		speaker in accordance with the sound of
		your front speakers. Recommended if your
		front speakers are of much higher quality
		than your other speakers.		• To stop the auto setup procedure, press one of the cursor
				buttons (k/ n / l / h) or ENTER. In the pause mode,
7 Once you have selected the desired setting,
				press k to retry the procedure, l to cancel auto setup.
press l to move back to Setup Menu.
				• If an error message appears during testing, refer to
				“Troubleshooting for the auto setup procedure” on
				page 30, and after carrying out the remedy, retry the auto
	Information			setup procedure.
	Setup Menu		Wiring
	Setup Type		Distance
	Start		Size

8Press n to select Setup Type, then select:

Auto		To automatically perform the entire
		auto setup procedure.
Step		To pause for confirmation between
		each check in the auto setup procedure.
	Information
	Setup Menu
	Setup Type		Auto
	Start		Step

28