Yamaha RX-V2500 Changing parameter settings, 1Set AMP/SOURCE/TV to AMP, 6Press EXIT, Notes

Changing parameter settings

Use the remote control to access and adjust each parameter.

	+	+	+	AMP
					1
	TV VOL	CH	VOL	SOURCE
	–	–	–	TV
		A / B / C / D / E
2	TV MUTE	TV INPUT	MUTE
	TOP		EXIT	PURE DIRECT	6
	TITLE		MENU
				NIGHT
		ENTER		AUDIO	3-5
				STRAIGHT
	RETURN		DISPLAY
				EFFECT

1Set AMP/SOURCE/TV to AMP.

2Press TOP on the remote control.

3Press k / n repeatedly to select a menu, then press h to enter the selected menu.

Test Tone
Speaker Set	Front
Speaker Distance	Center
Speaker Level	Surround

Front
Center	Large
Surround	Small
Surround Back	None
Presence

SYSTEM OPTIONS

4Press k / n repeatedly to select the parameter you want to adjust.

Presence	40Hz
Bass Out	60Hz
Bass Cross Over	80Hz (THX)
SWFR Phase	90Hz
	100Hz

5Press ENTER or h, then press k / n repeatedly to change the setting of the item you want to adjust.

Presence	40Hz
Bass Out	60Hz
Bass Cross Over	80Hz (THX)
SWFR Phase	90Hz
	100Hz

6Press EXIT.

y

If you want to continue adjusting parameter settings, press ENTER to return to the previously selected menu item.

Notes

•The available parameters may be displayed on more than one page of the GUI display. To scroll through pages, press k / n.

•You cannot change parameter values when Memory Guard is set to “Guard”. If you want to change the parameter values, set Memory Guard to “Free” (see page 67).

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cable is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the parameter values will return to the factory settings. If this happens, edit the parameter value again.

OPERATION ADVANCED

English

55