Yamaha RX-V2500 owner manual 4Press ENTER, Notes

3Press and hold LEARN for about 3 seconds using a ballpoint pen or similar object.

The library name (ex. “L:DVD”) and the selected component name (ex. “DVD”) appear alternately in the display window.

LEARN

y

If you want to setup for another component, press the input selector button or SELECT k / n to select the component.

Notes

•Be sure to press and hold LEARN for at least 3 seconds, otherwise the learning process will start.

•If you do not complete each of the following steps within 30 seconds, the setting mode will be automatically canceled. In this case, press LEARN again.

If you want to change a library (component category), press l / h. You can set a different type of component.

Library choices: L:DVD, L:DVR, L:LD, L:CD, L:CDR, L:MD, L:TAP (tape), L:TUN (tuner), L:AMP*, L:TV, L:CAB (cable), L:SAT (satellite), L:VCR

*The amplifier library (L:AMP) code is preset to “2000” in order to operate this unit. However, you can switch by entering one of the following 4 codes if necessary.

REMOTE CONTROL FEATURES

AMP library		Remote
		control ID
code
		(this unit’s
(remote	Function
		setting:
control
		see
setting)
		page 84)
2000	To operate this unit using the
(initial setting)	default code.
	To operate this unit using the	ID1
	default code.
		(initial
	To operate Zone 2 or Zone 3
		setting)
2001	features (see page 81).
	(U.S.A., Canada, U.K.,
	Europe and Australia models
	only)
2002	To operate this unit using an
	alternative code.
	To operate this unit using an
	alternative code.	ID2
	To operate Zone 2 or Zone 3
2003
	features of other YAMAHA
	receivers/amplifiers (see
	page 81).

When using multiple YAMAHA receivers/amplifiers, you may be able to operate the other components simultaneously with the default code setting. In this case, set one of the alternative codes to operate this unit separately.

4Press ENTER.

The four-digit code set for the selected component appears in the display window.

Note

“0000” appears in the display window if no code has been set.

5Press the numeric buttons to enter the four- digit remote control code for the component you want to use.

For a complete list of available remote control codes, refer to “LIST OF REMOTE CONTROL CODES” at the end of this manual.

STEREO		MUSIC	ENTERTAIN	MOVIE
1		2	3	4
THX		STANDARD		EXTD. SUR
5		6	7	8
1	MEMORY 2		A SPEAKERS B
9		0	+10	ENT.

OPERATION ADVANCED

English

71