Yamaha RX-V2500 owner manual Parametric EQ Parametric equalizer, Tone Control Tone control

SYSTEM OPTIONS

■Parametric EQ (Parametric equalizer)

Use this feature to adjust the PEQ for any speaker.		4 Press n EDIT and press ENTER to access the
		edit window.
LFE Level			Band	#1
Dynamic Range			Gain	0.0dB
Parametric EQ	Test Tone	Test Tone	Freq.	125.0Hz
			Q	1.000
Tone Control	Front L	Front L
Audio Option	Front R	Front R
		Center

1Press k / n to select Test Tone or the speaker you want to adjust.

•Test Tone turns on or off the test tone output when adjusting the tonal quality of each speaker.

•Front L adjusts the tonal quality of the front left speaker.

•Front R adjusts the tonal quality of the front right speaker.

•Center adjusts the tonal quality of the center speaker.

•Surround L adjusts the tonal quality of the surround left speaker.

•Surround R adjusts the tonal quality of the surround right speaker.

•Surround Back L adjusts the tonal quality of the surround back left speaker.

•Surround Back R adjusts the tonal quality of the surround back right speaker.

•Presence L adjusts the tonal quality of the presence left speaker.

•Presence R adjusts the tonal quality of the presence right speaker.

2Press h to access the settings window.

	PARAM	RESET
Test Tone	EDIT	EXIT
	Band / Gain
Front L
Front R
Center

3Press l / h to select PARAM, then press

ENTER to select a parameter from Band (band), Freq (frequency) or Q (Q factor).

The parameter selected in PARAM is highlighted.

•Press l / h to adjust the parameter.

•Press k / n to adjust the Gain.

•Press ENTER to exit the edit window.

5Repeat steps 3 and 4 until you are satisfied with the results.

y

If you want to reset all PEQ parameter settings for the selected speaker, select RESET and press ENTER.

6Select EXIT and press ENTER to exit the settings window.

y

•If you select “Band” in step 3, you can use this menu as a graphic equalizer.

•For more information on the parametric equalizer, see “PARAMETRIC EQUALIZER INFORMATION” on page 104.

■Tone Control (Tone control)

Use to adjust the amount of bass and treble output to your speakers and headphones.

Manual Setup > Sound > Tone Control >

Control (Tone control)
Choices: Defeat, Speaker, Headphone		ADVANCED OPERATION
Control	Speaker
	Defeat
Bass	Headphone
Treble

•Select “Defeat” if you do not want to make any adjustments.

•Select “Speaker” to adjust the bass/treble balance of your speakers.

•Select “Headphone” to adjust the bass/treble balance of your headphones.

English

59